產品詳情內容介紹
Reliance 57C410D控制4通道電路
控制輸出兩個4–20 mA或20–160 mA可配置執行器輸出，帶線性化曲線可供使用。致動器1默認為主高壓進口閥但兩個致動器通道都可配置為HP、HP2（用于分離范圍）或讀數八個C型繼電器觸點輸出可用。第一個通道是專用的為跳閘輸出，可配置為用作完整的總結跳閘或跳閘繼電器輸出（不包括外部跳閘輸入）。其他的七個是可配置繼電器，但第二個繼電器默認為報警摘要輸出?？梢詫?duì)每個繼電器進行編程，以提供與條件狀態相關的觸點如第一個列表中所列，或者可以根據第二個列表控制接口HMI、工廠DCS或其他可用的完整Modbus信息列表控制接口。三個物理端口可用于此通信方法，2個以太網（RJ45）端口和1個串行端口。串行端口協議可以是ASCII或RTU，通信可以是RS-232或RS-485以太網鏈路可以在ENET端口1或2上配置為TCP或UDP。
鍵盤和顯示器圖形顯示鍵輸入
前面板顯示屏旨在為用戶提供多種級別的配置、校準、調諧、操作和監測渦輪機的通道活動操作渦輪機不需要額外的控制面板渦輪機控制功能可以從505的前面板執行?？撮T狗定時器/CPU故障控制顯示屏左前側的IO鎖定和CPU運行狀況LED是始終處于與控件背面的LED相同的狀態。他們是完全由505控制硬件控制，不受GAP應用程序。
看門狗定時器和CPU故障電路監控微處理器和微處理器存儲器。如果微處理器無法復位最后一次復位后15毫秒內，CPU故障控制將激活復位輸出。這將重置CPU，斷開所有繼電器輸出，并關閉所有毫安輸出。Flex505控制器是現有505產品線的重大升級增強的CPU、圖形顯示、通信和I/O功能。
注：使用Woodward CAN時，此控制器支持?jǐn)U展I/O選項分布式I/O節點（RTCnet和LINKnet HT）。
特征
與當前505相同的安裝/安裝8.4英寸LCD顯示器（800x600）和鍵盤（LV）輸入功率：18-36 Vdc輸入，隔離（HV）輸入功率：88-264 Vac/90-150 Vdc，隔離工作范圍為-30°C至+70°C（帶顯示器）通信
（4） 以太網10/100通信端口，隔離
（4） CAN通信端口（1 Mbit），隔離
（1） RS-232/RS-485端口，隔離
（1） RS-232服務端口，隔離
I/O電路GAP可配置更新率為5毫秒至160毫秒
（2） 速度傳感器輸入（MPU/前置器）（帶前置器電源）
（8） 模擬輸入4-20 mA通道（帶回路電源）
（6） 模擬輸出4-20 mA通道
（2） 致動器輸出通道（可配置4-20 mA/20-200 mA）
（20） 離散輸入通道（帶觸點電源）
（8） 繼電器輸出（表c）
Control Outputs
Two 4–20 mA or 20–160 mA configurable actuator outputs with linearization curves are available for use. Actuator 1 is defaulted to be the main HP inlet valve demand, but both actuator channels are configurable to be HP, HP2 (for split range) or a readout Eight Form-C relay contact outputs are available. The first channel is dedicated to be a Trip output and can be configured for use as a complete Summary Trip or a TRIP relay output (where the External Trip inputs are not included). The other seven are configurable relays, however the second relay is defaulted to be an Alarm Summary output. Each relay can be programmed to provide a contact related to a conditional state as listed in the first list, or it can be triggered as a level-active switch as per the second list
Control Interfaces
A complete Modbus list of information is available for HMI, plant DCS or other control interfaces. Three physical ports are available for this communication method, 2 Ethernet (RJ45) ports and 1 serial port. The serial port protocol can be either ASCII or RTU and the communications can be RS-232 or RS-485. The Ethernet links can be configured as TCP or UDP on either ENET ports 1 or 2. Keypad and Display Graphical Display Key Inputs The front panel display is designed to provide the user with multiple levels of access for configuring, calibrating, tuning, operating and monitoring the turbine operation. No additional control panels are required to operate the turbine, every turbine control function can be performed from the 505’s front panel.
Watchdog Timer/CPU Fault Control
The IO Lock and CPU Health LED’s on the front left side of the display – are always in an identical state as the LED’s on the back side of the control. They are completely controlled by the 505 control hardware and are not controlled by the GAP application. A watchdog timer and CPU fault circuit monitors the operation of the microprocessor and microprocessor memory. If the microprocessor fails to reset the timer within 15 milliseconds of the last reset, the CPU fault-control will activate the reset output. This resets the CPU, de-energizes all relay outputs and turns off all milliamp outputs.
The Flex505 controller is a significant upgrade to the existing 505 product line with enhanced CPU, Graphical display, communications, and I/O functions. Note: This controller supports expanded I/O options when using Woodward CAN distributed I/O nodes (RTCnet and LINKnet HT). Features Same installation/mounting as current 505 8.4” LCD Display (800x600) and Keypad (LV) input power: 18-36 Vdc input, isolated (HV) input power: 88-264 Vac / 90-150 Vdc, isolated Operating range of –30 °C to +70 °C (with display) Communications (4) Ethernet 10/100 communication ports, isolated (4) CAN communication ports (1 Mbit), isolated (1) RS-232/RS-485 port, isolated (1) RS-232 Service port, isolated I/O circuits GAP configurable update rates of 5 ms to 160 ms (2) Speed Sensor inputs (MPU/Prox) (with Prox Power) (8) Analog input 4-20 mA channels (with Loop Power) (6) Analog output 4-20 mA channels (2) Actuator output channels (configurable 4-20 mA/20-200 mA) (20) Discrete input channels (with Contact Power) (8) Relay outputs (form-c)
公司主營產品圖展示
產品優勢
1：國外專業的供貨渠道，具有價格優勢
2：產品質量保證，讓您售后無憂
3：全國快遞包郵
4：一對一服務
公司主營產品文字介紹
PLC可編程控制器模塊，DCS卡件，ESD系統卡件，振動監測系統卡件，汽輪機控制系統模塊，燃?xì)獍l(fā)電機備件等，優勢品牌：Allen Bradley、BentlyNevada、ABB、Emerson Ovation、Honeywell DCS、Rockwell ICS Triplex、FOXBORO、Schneider PLC、GE Fanuc、Motorola、HIMA、TRICONEX、Prosoft等各種進口工業零部件、歐美進口模塊。
產品廣泛應用于冶金、石油天然氣、玻璃制造業、鋁業、石油化工、煤礦、造紙印刷、紡織印染、機械、電子制造、汽車制造、塑膠機械、電力、水利、水處理/環保、鍋爐供暖、能源、輸配電等等
