產品內容介紹
Harmonic Drive CHM-40A-A-E16384-B-SP控制PLC減速機
設計和功能IMR 6000/10、../20、../30系統框架是epro MMS 6000機器監控系統的組件。它們由一個19英寸的卡架組成，并在正面包含以下卡槽：?8?10個用于MMS 6000系列顯示器的顯示器插槽（取決于IMR類型）?2?4個插槽（取決于IMR類型），用于適配一個或多個邏輯卡，例如MMS 6740；1個插槽，用于適配一個接口卡，例如，MMS 6830、MMS 6831、，MMS 6824或MMS 6825?MMS 6000機器監控系統的組件?用于適應信號處理外圍設備（監視器、邏輯卡和接口卡）的插槽?外圍設備通過彈簧籠的外部連接? 和螺紋連接插頭?系統框架配置（depen? 通過網橋或Dip通過硬件? 交換機?構建RS485總線，用于集成和配置監視器與系統框架?生成主控? 按鍵信號? 第1個監視器插槽處的監視器（不在IMR 6000/20處）IMR 60000/10../20../30系統框架是為工業應用而開發的，在工業應用中，需要在電子設備和工廠設備之間進行可靠的適配。對于系統幀IMR 6000/10、../20、../30，信號處理外圍設備的適當適配如下：? 報警信號? 錯誤信號? 連接結果? 可以實現和處理外部信號，以輸入和輸出所有相關信號。系統框架后部的外部外圍通過5進行連接?, 6.? 和8?桿彈簧?籠子? 和/或螺紋連接塞（Phoenix）。RS485總線連接以及通道清除? 監視器的信號輸出通過這些插頭輸出。
系統幀IMR6000/10處的第一個監視器插槽
IMR6000/30提供了使用按鍵顯示器（MMS 6310或MMS 6312）的可能性，并可通過系統框架或外部連接將這些按鍵信號轉發給其他顯示器。系統框架IMR 6000/10、../20、../30的后部用于：?信號供應?進一步處理的信號輸出?系統框架的參數化系統框架后部與外部外圍的連接通過彈簧籠實現? 或螺紋連接塞。如有必要，通過集成相應的接口卡，可以在一個系統框架內建立多條RS485總線。通過外部連接和/或相關Dip的配置進行適當?shù)膮?shù)化? 開關。系統框架IMR 6000/10、../20、../30具有極大的節約潛力，布線復雜。系統框架后部外部外圍的連接由5個? 和8? 桿彈簧籠? 或螺紋端子連接插頭（Phoenix）。RS485? 總線連接、各個鍵連接以及監視器的所有通道暢通、警報和危險警報都通過這些插頭進行。系統框架后部的電源插頭可以由5個?桿彈簧籠? 或螺紋端子連接插頭。系統機架上的第一個監視器插槽提供了一種可能性，可以暗示一個關鍵監視器，并將其關鍵信號中繼到其他監視器。一方面，接口卡提供了通過Dip直接連接到RS485總線的選項? 開關配置，以及通過插頭處的外部接線將監視器連接到RS 485總線的可能性。基于實施的雙列直插式開關，RS485?可以相應地配置總線。
Design and functionality
The system frames IMR 6000/10, ../20, ../30 are components of the epro MMS 6000 machine monitoring system. They consist of a 19” card frame and comprise the following card slots at the front side: ? 8?10 Monitor slots (depending on the IMR type) for monitors of the MMS 6000 series ? 2?4 slots (depending on the IMR type) for adaptation of one or more logic cards e.g. MMS 6740 ? 1 slot for adaptation of an interface card e.g. MMS 6830, MMS 6831, MMS 6824 or MMS 6825? Component of the MMS 6000 Machine Monitoring System ? Slots for adaptation of the signal processing periphery (monitors, logic cards and interface cards) ? External connection of the periphery via spring cage? and screw connection plugs ? System frame configuration (depen? ding on the version) by hardware via bridges or via Dip? switches ? Build up of RS485 bus lines for integration and configuration of the monitors with the system frames ? Generation of master? key signals by a key? monitor at the 1st monitor slot (not at IMR 6000/20)The system frames IMR 6000/10 ../20 ../30 are developed for general use in industrial applications, where reliable adaptations between electronic devices and plant devices are necessary. With the system frames IMR 6000/10, ../20, ../30, an appropriate adaptation of the signal processing periphery like: ? alarm signals ? error signals ? connection results ? external signals can be realized and processed to feed in and spend out all relevant signals.The connection of the external periphery at the rear of the system frame does take place via 5?, 6? and 8?pole spring?cage? and/or screw connection plugs (Phoenix). The RS485 bus connections as well as the channel clear? and the signal outputs of the monitors are fed out via these plugs.
The first monitor slot at the system frames IMR6000/10
and IMR6000/30 offers the possibility to imply a key monitor (MMS 6310 or MMS 6312) and to relay these key signals to other monitors via the system frame or external connections. The rear of the system frames IMR 6000/10, ../20, ../30 serve the purpose of: ? signal supply ? signal output for further processing ? parameterization of the system frame The connection to the external periphery at the rear of the system frame is made by spring cage? or screw connection plugs. If neccessary, it is possible to build up several RS485 bus lines within one system frame by the integration of a corresponding interface card. The appropriate parameterization does take place via external connections and/or via the configuration of the regarding Dip? switches. The system frames IMR 6000/10, ../20, ../30 offer substantial saving potential with the wiring complexity The connection of the external periphery at the rear of the system frame is made by 5? and 8? pole spring cage? or screw terminal connection plugs (Phoenix). The RS485? bus connections, the respective key connection as well as all channel clear, alert and danger alarms of the monitors are carried out via these plugs. The voltage supply plugs at the rear of the system frame can be made by 5?pole spring cage? or screw terminal connection plugs. The 1st monitor slot at the system frame offers the possibility to imply a key monitor and to relay its key signals to the other monitors. On the one hand the interface card offers the option of direct connection to a RS485 bus via Dip? switch configuration and, in addition, the possibility to connect the monitors to the RS 485 bus by external wiring at the plugs. On the basis of the implemented Dip switches, the RS485?Bus can be configured accordingly.
產品優勢
1：國外專業的供貨渠道，具有價格優勢
2：產品質量保證，讓您售后無憂
3：全國快遞包郵
4：一對一服務
公司主營范圍簡介
PLC可編程控制器模塊，DCS卡件，ESD系統卡件，振動監測系統卡件，汽輪機控制系統模塊，燃?xì)獍l(fā)電機備件等，優勢品牌：Allen Bradley、BentlyNevada、ABB、Emerson Ovation、Honeywell DCS、Rockwell ICS Triplex、FOXBORO、Schneider PLC、GE Fanuc、Motorola、HIMA、TRICONEX、Prosoft等各種進口工業零部件、歐美進口模塊。
產品廣泛應用于冶金、石油天然氣、玻璃制造業、鋁業、石油化工、煤礦、造紙印刷、紡織印染、機械、電子制造、汽車制造、塑膠機械、電力、水利、水處理/環保、鍋爐供暖、能源、輸配電等等
