產品內容介紹
CUTLER HAMMER CPS120480DSK控制器系統擴展
通信規范可連接單元：ESB總線節點單元（ANB10?), 光纖ESB總線節點單元（ANB11?), 以及光纖ESB總線中繼器模塊（ANT10U）的單元可連接單元數：可以連接到ESB總線的ESB總線節點單元數和光纖ESB節點單元數取決于所選數據庫?？蛇B接單元*1:ESB總線節點單元（ANB10）中不包括用于ESB總線中繼器模塊（ANT10U）的單元?), 光纖ESB總線節點單元（ANB11?) *2： 將ESB總線節點單元和光纖ESB總線單元連接到FCU（AFV30?/AFV40型?), 將ESB總線耦合器模塊（EC401或EC402）安裝在插槽7和8中。EC401最多可以連接九個節點單元（ANB10?或ANB11?). EC402最多可以連接九個節點單元（ANB10?或ANB11?) 分別位于上部和下部。節點單元總數的總和（ANB10? 或ANB11?) 每個FCU不應超過指定的數量*3： 對于AFV40，單個機柜中最多可以安裝11個ESB總線節點單元、光纖ESB總線單元和光纖ESB母線中繼器模塊單元?. 傳輸路徑規格網絡拓撲：總線拓撲傳輸路徑冗余：可用傳輸速度：128兆位/秒傳輸電纜：專用電纜（YCB301），光纜（*1）傳輸距離：最大10米（*2），50公里（使用ANT411光纖ESB總線中繼器模塊時）（*3）*1：光纜規格連接器類型：LC（符合IEC 61754-20）建議電纜：石英單模光纖（JIS C6835 SSMA-9.3/125 IEC 60793-2-50B1.1）芯數：2*2：EC401最大10米，上下兩側最大10米，對于EC402.*3：使用光纖ESB總線中繼器模塊距離最多可延長50公里。有鏈式和星形連接配置。
傳輸路徑規格
網絡拓撲：總線拓撲傳輸路徑冗余：可用傳輸速度：10兆位/秒傳輸電纜：同軸電纜（YCB141、YCB311）。使用YCB147/YCB149總線適配器單元將YCB141電纜連接到YCB311電纜。連接YCB311電纜時，應為每段（*1）使用一個接地裝置（YCB117）。傳輸距離：YCB141:混合YCB141和YCB311時最大185米：YCB41+（185/500）的長度x YCB31l的長度≤ 185總線適配器單元數量：每段最多4個（*1）通用以太網中繼器：總傳輸距離受中繼器數量限制。L≤ 4-0.5×n L：總傳輸距離（km）n：通用以太網中繼器的數量（最多4個中繼器）*1：如果在ER總線上使用中繼器，由中繼器隔離的ER總線的每個部分稱為一個段。? 法規遵從性有關以下標準的詳細信息，請參閱“系統概述”（GS 33K01A10-50E）和每個產品的GS。? 光ESB總線中繼器模塊電源模塊單元、光ESB母線中繼器組件安裝在一個單元中。有關更多詳細信息，請參閱“光纖總線中繼器模塊單元（用于AFV30?/AFV40型?)” （第33K50F50-50E節）。I/O模塊I/O模塊包括模擬I/O模塊、數字I/O模塊和通信模塊。模擬I/O模塊有幾種類型，包括隔離通道型、隔離型和非隔離型。此外，為了更換CENTUM V，還提供了CENTUM-XL和μXL兼容模塊，以便將信號調節器的系統電纜連接到這些兼容模塊。對于I/O模塊，可以指定環保支持（溫度環境支持、G3支持）選項。I/O模塊為防爆產品。詳見《防爆》（TI 33Q01J30-01E）
Communication Specifications
Connectable Units: ESB Bus Node Unit (ANB10?), Optical ESB Bus Node Unit (ANB11?), and Unit for Optical ESB Bus Repeater Module (ANT10U) Number of Connectable Units: The number of ESB bus node units and optical ESB bus node units that can be connected to the ESB bus varies depending on the selected database. Units for Optical ESB Bus Repeater Module (ANT10U) are not included in the number of connectable units *1: ESB Bus Node Unit (ANB10?), Optical ESB Bus Node Unit (ANB11?) *2: To connect the ESB bus node unit and optical ESB bus node unit to the FCU (AFV30?/AFV40?), install the ESB Bus Coupler Module (EC401 or EC402) in slots 7 and 8. EC401 can be connected a maximum of nine Node Units (ANB10?or ANB11?). EC402 can be connected a maximum of nine Node Units (ANB10?or ANB11?) on the upper and lower sides, respectively. The sum of the total number of Node Units (ANB10? or ANB11?) per FCU should not exceed the specified number. *3: The maximum number of ESB bus node units, optical ESB bus node units, and units for optical ESB bus repeater module that can be installed in a single cabinet is 11 for AFV40?. Transmission Path Specifications Network Topology: Bus topology Transmission Path Redundancy: Available Transmission Speed: 128 megabits per second Transmission Cable: Dedicated cable (YCB301), an optical fiber cable (*1) Transmission Distance: Max. 10 m (*2), 50 km (when using the ANT411 Optical ESB Bus Repeater Module) (*3) *1: Optical Fiber Cable Specifications Connector Type: LC (compliant with IEC 61754-20) Recommended Cable: Quartz single-mode fiber (JIS C6835 SSMA -9.3/125 IEC 60793-2-50B1.1) Number of Cores: 2 *2: Max. 10 m for EC401 and max. 10 m on the upper and lower sides, respectively, for EC402. *3: The distance can be extended to a maximum of 50 km using the optical ESB bus repeater module. Chain and star connection configurations are available.
Transmission Path Specifications
Network Topology: Bus topology Transmission Path Redundancy: Available Transmission Speed: 10 megabits per second Transmission Cable: Coaxial cable (YCB141, YCB311). Use YCB147/YCB149 Bus Adapter Unit to connect a YCB141 cable to a YCB311 cable. One grounding unit (YCB117) per segment (*1) should be used when connecting YCB311 cable. Transmission Distance: YCB141: Max.185 m When mixing YCB141 and YCB311: Length of YCB141 + (185/500) x Length of YCB311 ≤ 185 Number of Bus Adapter Units: Max. 4 per segment (*1) General-purpose Ethernet Repeater: The total transmission distance is limited by the number of repeaters. L ≤ 4 - 0.5 × n L: total transmission distance (km) n: the number of the general-purpose Ethernet repeater (Max. 4 repeaters) *1: If repeaters are used on ER bus, each part of the ER bus segregated by a repeater is referred to as a segment. ? Regulatory Compliance For the detailed information of following standards, see “System Overview” (GS 33K01A10-50E) and GS on each product.? Unit for Optical ESB Bus Repeater Module Power Supply Modules, Optical ESB Bus Repeater Module are installed in a Unit. For more details, refer to “Unit for Optical Bus Repeater Module (for AFV30?/AFV40?)” (GS 33K50F50-50E).I/O Modules The I/O Modules include Analog I/O Modules, Digital I/O Modules and Communication Modules. There are several types of Analog I/O Modules, including the isolated channel type, isolated type and non-isolated type. In addition, to enable replacements from CENTUM V, CENTUM-XL and μXL compatible modules are provided so that the system cable from the Signal Conditioner can be connected to these compatible modules. For the I/O Modules, the environment-proof support (temperature environment support, G3 support) options can be specified. The I/O Module is Explosion Protection product. For details, refer to “Explosion Protection” (TI 33Q01J30-01E)
產品優勢
1：國外專業的供貨渠道，具有價格優勢
2：產品質量保證，讓您售后無憂
3：全國快遞包郵
4：一對一服務
公司主營范圍簡介
PLC可編程控制器模塊，DCS卡件，ESD系統卡件，振動監測系統卡件，汽輪機控制系統模塊，燃氣發電機備件等，優勢品牌：Allen Bradley、BentlyNevada、ABB、Emerson Ovation、Honeywell DCS、Rockwell ICS Triplex、FOXBORO、Schneider PLC、GE Fanuc、Motorola、HIMA、TRICONEX、Prosoft等各種進口工業零部件、歐美進口模塊。
產品廣泛應用于冶金、石油天然氣、玻璃制造業、鋁業、石油化工、煤礦、造紙印刷、紡織印染、機械、電子制造、汽車制造、塑膠機械、電力、水利、水處理/環保、鍋爐供暖、能源、輸配電等等
