MVME167備件庫存
后綴配置代碼： 后綴：注意使用后綴代碼“”表示某個位置沒有塊。#黑色側面#白色側面#黑色側面#白色側面#黑色側#白色側#黑色側#白色側# # # #接觸塊安裝深度接觸塊目錄號和后綴代碼模塊目錄號接觸塊后綴配置公告油密選擇開關產品數據使用以下步驟選擇滿足選擇開關應用需求所需的組件：.從第頁表中選擇所需的操作員前綴，用于位選擇開關，或從第頁表中選擇位選擇開關。.選擇符合所需電路組合的凸輪代碼第頁表為位選擇器開關，第頁表為位選擇器開關。如果不止一個凸輪提供所需的目標表，請從步驟中選擇最簡單的接觸配置。.識別與所選凸輪配合的接觸塊，以實現所需的目標表。注意它們是位于白色側還是黑色側。.如果需要或需要，使用下表將接觸塊減少到最簡單最緊湊的形式：接觸塊減少規則取代和 取代和 取代和 取代 取代 迷你取代迷你。訂購操作員和接觸塊作為組件。注意操作員目錄號由操作員前綴和凸輪代碼組成。從步驟到步驟示例：同樣，請確保使用前綴按目錄號訂購接觸塊。示例：或，而不僅僅是或。中。
或作為完整的工廠組裝設備訂購。設備目錄號由操作員前綴凸輪代碼和接觸塊配置后綴組成。有關此后綴的詳細信息，請參閱第頁。示例：選擇開關選擇步驟公告油密選擇開關產品數據選擇帶有標準旋鈕和三個電路的三位“手動自動”選擇開關，如圖所示： 。從第頁表中選擇操作員前綴。 。從第頁表中選擇凸輪和索引代碼。代碼或同樣有效。本例使用。 .根據目標表選擇接觸塊。 =黑色 =黑色 =白色.通過將和組合成來簡化黑色側參見第頁。接觸塊組合為：# # 黑色側白色側。訂購操作員和接觸塊作為組件：和 ?；蜃鳛楣S組裝的設備訂購：:白色側黑色側空白白色側，空白 #黑色側#白色側#黑色側#白色側有關附加后綴說明，請參閱第頁。選擇開關選擇步驟示例公告油密選擇開關產品數據表 位選擇開關操作員類型? 操作員功能目錄號? 標準標準顏色為黑色，從左側彈簧返回左側和右側旋鈕桿標準顏色為黑色左側彈簧返回右側 機翼?xiàng)U標準顏色是灰色? 左側彈簧復位左側彈簧復位右側彈簧復位左側和右側彈簧復位_操作員功能氣缸鎖保持位置左側彈簧復位? 目錄編號? 目錄編號? 目錄編號? 左中右全部
Suffix configuration code: Suffix: Note that the suffix code "" is used to indicate that there is no block at a certain location# Black side # white side # black side # white side # black side # white side # black side # black side # white side # white side # # # contact block installation depth contact block catalog number and suffix code module catalog number contact block suffix configuration announcement oil tight selector switch product data Use the following steps to select the components needed to meet the application requirements of the selector switch: Select the desired operator prefix from the table on page for the bit selector switch or select the bit selector switch from the table on page Select the cam code according to the required circuit combination. The table on page is the position selector switch, and the table on page is the position selector switch. If more than one cam provides the desired target table, select the simplest contact configuration from step Identify the contact blocks that mate with the selected cam to achieve the desired target table. Note whether they are on the white or black side If necessary or needed, use the following table to reduce the contact block to the simplest and most compact form: contact block reduction rules replace and replace and replace and replace mini replace mini. Order the operator and contact block as an assembly. Note that the operator catalog number consists of an operator prefix and a cam code. Example from step to step: Again, make sure to order contact blocks by catalog number using prefix. Example: or, not just or. Medium.
Or ordered as complete factory assembled equipment. The equipment catalog number consists of the operator prefix cam code and the contact block configuration suffix. For more information about this suffix, see page. Example: The selection step of the selector switch announces that the product data of the oil tight selector switch selects a three position "manual automatic" selector switch with a standard knob and three circuits, as shown in the figure. Select the operator prefix from the table on page. Select the cam and index code from the table on page. Code or is equally valid. This example uses Select the contact block according to the target table= Black=black=white Simplify the black side by combining and see page. The contact block combination is: # # black side and white side. Order operators and contact blocks as components: and. Or order as factory assembled equipment: white side black side blank white side, blank # black side # white side # black side # white side for additional suffix instructions, see page. Example of selection steps of the selector switch Announcement Oil tight selector switch Product data table Position selector switch Operator type Operator function catalog number Standard color is black, the standard color of the left spring returns to the left and right knob rods is black Left spring returns to the right wing rods Standard color is gray Left spring returns Left spring returns Right spring returns Left spring returns Left spring returns Left and right spring returns_ Operator Function Cylinder Lock Hold Position Left Spring Return ? Catalog Number ? Catalog Number ? Catalog Number ? Left Middle Right All
