KEBA E-CG-CONTROL控制板
?移除PQM的控制電源?重新加載工廠設置點以永久啟用設置點訪問功能，啟用設置點，然后將setpoint access ON FOR設置為UNLIMITED。即使從PQM中移除控制電源，設定點訪問仍保持啟用狀態。無論設定點訪問功能的狀態或分配給設定點訪問的輸入開關的狀態如何，都可以通過串行端口更改設定點。要更改設定點訪問代碼，請啟用設定點訪問并執行以下步驟：更改設定點存取代碼：是輸入設定點訪問碼：4重新輸入設定點存取碼：4如果在禁用設定點訪問時嘗試更改設定點，則顯示設定點訪問：禁用消息以允許啟用設定點存取。一旦啟用了設置點訪問，PQM顯示將返回原始設置點消息。
? The control power to the PQM is removed ? The factory setpoints are reloaded To permanently enable the setpoint access feature, enable setpoint access and then set SETPOINT ACCESS ON FOR to UNLIMITED. Setpoint access remains enabled even if the control power is removed from the PQM. Setpoints can be changed via the serial ports regardless of the state of the setpoint access feature or the state of an input switch assigned to setpoint access. To change the setpoint access code, enable setpoint access and perform the steps as outlined below:CHANGE SETPOINT ACCESS CODE: YES ENTER SETPOINT ACCESS CODE: 4 RE-ENTER SETPOINT ACCESS CODE: 4 If an attempt is made to change a setpoint when setpoint access is disabled, the SETPOINT ACCESS: DISABLED message is displayed to allow setpoint access to be enabled. Once setpoint access has been enabled, the PQM display will return to the original setpoint message.
轉載請附上此鏈接：http://m.wzljsf.com/
