FANUC A02B-0319-B502觸摸屏模塊
電源此屏幕（從主屏幕中選擇）允許用戶在VMIVME-7750上配置節能選項。僅當啟用“CPU節流下降閾值”時，才會顯示節流和CPU節流回滯后選項。默認設置為“禁用”。CPU節流回滯后的默認值為10C。限制的默認值為50%。引導優先級由堆棧順序決定，頂部優先級最高，底部最低。可以通過突出顯示設備并使用<+>或<->鍵將其移動到堆棧中所需的順序來修改順序。通過突出顯示特定設備并按下，可以禁用設備的引導。展開或折疊設備，旁邊帶有+或-。引導優先級由堆棧順序決定，頂部優先級最高，底部最低?？梢酝ㄟ^突出顯示設備并使用<+>或<->鍵將其移動到堆棧中所需的順序來修改順序。通過突出顯示特定設備并按，可以禁用該設備的引導功能。展開或折疊設備時，旁邊帶有+或-。
Power
This screen, selected from the Main screen, allows the user to configure power saving
options on the VMIVME-7750.The Throttling and CPU Throttling back hysteresis selections will only be shown if
“CPU Throttling Down Threshold” is enabled. The default is Disabled. The default for
CPU Throttling back hysteresis is 10C. The default for Throttling is 50% The Boot priority is determined by the stack order, with the top having the highest
priority and the bottom the least. The order can be modified by highlighting a device
and, using the <+> or <-> keys, moving it to the desired order in the stack. A device
can be boot disabled by highlighting the particular device and pressing
