FANUC A06B-6127-H207伺服放大器
設備庫提供要與設備庫向?qū)б黄鸢惭b的設備對象類型。DLW設備庫向?qū)且环N工具，用于將設備庫提供的單獨交付的設備對象類型安裝到800xA系統中。DTM（設備類型管理器）DTM是設備供應商提供的軟件模塊。它用于建立與設備的通信和數據訪問。DTM通過FDT接口與工程工具協作并交換數據。DPM1 DP主級1。在配置從設備之后，DPM1開始與從設備進行循環數據傳輸。通過MS1（主從級1）連接，DPM1還可以與從屬級DP主從級2進行非循環通信。DPM2主要用于從屬設備的DP-V1配置。通過MS2（主從級2）連接設置非循環通信。故障切換發生錯誤時，主模塊停止工作，備份模塊處于活動狀態。
The Device Library provides device object types to be
installed with the Device Library Wizard.
DLW The Device Library Wizard is a tool to install separately
delivered device object types provided by the Device
Library into an 800xA system.
DTM (Device Type
Manager)
A DTM is a software module provided by the device
vendor. It is used to establish communication and data
access to the device. The DTM co-operates and
exchanges data with the engineering tools via the FDT
interfaces.
DPM1 DP Master Class 1. After configuring the slave the DPM1
gets into the cyclic data transmission with the slave. Via
MS1 (Master Slave Class 1) connection the DPM1 can
also have acyclic communication with the slave.DP Master Class 2. The DPM2 is mainly used for DP-V1
configuration of slave devices. The acyclic
communication is setup via MS2 (Master Slave Class 2)
connections.
Failover In case of an error the primary module stops working
and the backup module gets active.
