Vibro-meter 200-560-000-016 200-560-101-015 VM600 IOC4T
如果需要，可以增加計算值以允許更多的非循環流量。如果總線上有其他主機，則必須在這些其他主機進行循環和非循環通信所需的時間內增加計算值。請參閱這些主機的配置。在多主機系統中，所有主機必須使用相同的TTR值。GAP因子（GAP）此參數定義GAP維護周期之間的令牌循環次數。當前版本的CI854/CI854A始終使用1值，與此處輸入的值無關。最高站點地址（HSA）此參數定義PROFIBUS上的最高站點地址。將該參數設置為至少為總線上所有主設備和從設備配置的最高節點地址數。
The calculated value may be increased to allow more acyclic
traffic, if necessary.If there are other masters on the bus, the
calculated value has to be increased for the time these other
masters need for their cyclic and acyclic communication. Refer to
the configuration of these masters.
In a multi-master system all masters must use the same
value for TTR.
GAP factor
(GAP)
This parameter defines the number of token rotations between
GAP maintenance cycles.
The current version of the CI854/CI854A always uses a
value of 1 independent of the value entered here.Highest
station
address
(HSA)
This parameter defines the highest station address on the
PROFIBUS. Set the parameter to at least the highest number of
node addresses configured for all masters and slaves present on
the bus.
