GESPAC GESPCB-436控制器
GESPAC GESPCB-436從添加子菜單中，選擇全部添加以添加組件的所有財產和信號。4.在“模擬監視”窗口中，右鍵單擊監視項的行，然后選擇“刪除”以刪除一個或多個監視項。注意！監視項目保存在工作站中，并在工作站打開時恢復。設置斷點您可以通過以下方式之一設置斷點：1。要設置模擬斷點，請選中監視項旁邊的復選框。注意！默認情況下，只要屬性或信號的值發生變化，模擬就會暫停。2.在“模擬監視”窗口中，右鍵單擊監視項的行，然后選擇“中斷條件”。“中斷條件”對話框出現。?當值滿足某個邏輯條件時，GESPAC GESPCB-436將模擬設置為暫停?？梢栽凇氨O(jiān)視”窗口的“中斷”列中查看該情況。?當達到斷點時，模擬暫停，這由啟用的“播放”和“停止”按鈕指示。?如果“模擬監視”窗口隱藏在其他窗口后面，它將顯示在前面，相應監視項目的文本將變?yōu)榧t色。GESPAC GESPCB-436
GESPAC GESPCB-436控制器
From the Add submenu, select Add all to add all the properties and signals of a component. 4. In the Simulation Watch window, right-click on the row of the watch item and select Delete to delete one or more watch items. NOTE! The Watch items are saved in the station and are restored when the station is opened. Setting Breakpoints You can set the breakpoint in one of the following ways: 1. To set the simulation breakpoint, select the check box next to a watch item. NOTE! By default, the simulation is paused whenever the value of the property or signal changes. 2. In the Simulation Watch window, right-click on the row of the watch item and select Break Condition. The Break Condition dialog box appears. ? Set the simulation to paused, when the value meets a certain logical condition. The condition can be viewed in the Break column of the Watch window. ? When a breakpoint is reached, the simulation is paused which is indicated by both the Play and Stop buttons being enabled. ? If the Simulation Watch window is hidden behind the other windows, it is brought to the front and the text of the corresponding watch item turns red.GESPAC GESPCB-436
公司主營優勢
應用行業
