GESPAC GESINP-2B輸入板/卡
GESPAC GESINP-2B參考選擇與所有位置或點相關的參考坐標系。中心點（A）單擊其中一個框，然后單擊圖形窗口中的中心點，將值傳遞到中心點框，或鍵入位置。中心點將是球體的局部原點。半徑（B）指定球體的半徑。直徑指定球體的直徑。創建曲面1。單擊“曲面”，然后單擊要?jiǎng)?chuàng)建的實體類型以打開對話框。2.在對話框中輸入請求的值，然后單擊“創建”。有關要?jiǎng)?chuàng)建的曲線的特定對話框的詳細信息，請參見以下內容：參考選擇所有位置或點都將與之相關的參考坐標系。GESPAC GESINP-2B中心點（A）單擊其中一個框，然后單擊圖形窗口中的中心點，將值傳遞到中心點框，或鍵入位置。中心點將是圓的局部原點。方向如果對象應相對于參考坐標系旋轉，請指定旋轉。半徑（B）指定圓的半徑。直徑指定圓的直徑。GESPAC GESINP-2B
GESPAC GESINP-2B輸入板/卡
Reference Select the Reference coordinate system to which all positions or points will be related. Center Point (A) Click in one of these boxes, and then click the center point in the graphics window to transfer the values to the Center Point boxes, or type the position. The center point will be the local origin of the sphere. Radius (B) Specify the radius of the sphere. Diameter Specify the diameter of the sphere.Creating a surface 1. Click Surface and then click the type of solid you want to create to bring up a dialog box. 2. Enter requested values in in the dialog box and click Create. For detailed information about the specific dialog box for the curve to create, see below:Reference Select the Reference coordinate system, to which all positions or points will be related. Center Point (A) Click in one of these boxes, and then click the center point in the graphics window to transfer the values to the Center Point boxes, or type the position. The center point will be the local origin of the circle. Orientation If the object shall be rotated relative to the reference coordinate system, specify the rotation. Radius (B) Specify the radius of the circle. Diameter Specify the diameter of the circle.GESPAC GESINP-2B
公司主營優勢
應用行業
