GESPAC GESCI0-1B檢測板
GESPAC GESCI0-1B拉伸曲面或曲線1。從選擇級別工具欄中，根據需要選擇“曲面”或“曲線”。2.在圖形窗口中，選擇要拉伸的曲面或曲線。根據需要單擊“擠出曲面”或“擠出曲線”?！皵D出曲面或曲線”對話框?qū)⒃诮g覽器下方打開。3.對于沿向量的拉伸，請?zhí)顚懼?。對于沿曲線擠出，請選擇“沿曲線擠出”選項。單擊“曲線”框，然后在“圖形”窗口中選擇曲線。4.如果希望窗體顯示為曲面模型，請清除“生成實體”復選框。5.單擊“創建”?！皵D出曲面或曲線”對話框“曲面或曲線表示要擠出的曲面或曲線?！?。要選擇曲面或曲線，請首先在框中單擊，然后在圖形窗口中選擇曲面或曲面。沿向量擠出啟用沿指定向量擠出。起點（mm）矢量的起點。到點（mm）矢量的終點。沿曲線擠出啟用沿指定曲線擠出。GESPAC GESCI0-1B曲線表示用作掃掠路徑的曲線。xx0600003076要選擇曲線，請首先單擊框，然后單擊圖形窗口中的曲線。生成實體選中此復選框可將拉伸形狀轉換為實體。
GESPAC GESCI0-1B檢測板
Extruding a surface or curve 1. From the selection level toolbar, select Surface or Curve, as appropriate. 2. In the graphics window, select the surface or curve you wish to extrude. Click Extrude Surface or Extrude Curve, as appropriate. The Extrude Surface or Curve dialog box opens below the Modeling browser. 3. For extrusion along a vector, fill in the values. For extrusion along a curve, select the Extrude Along Curve option. Click the Curve box, and select the curve in the Graphics window. 4. If you wish the form to appear as a surface model, clear the Make Solid check box. 5. Click Create.The Extrude Surface or Curve dialog box Surface or Curve Denotes the surface or curve to be extruded. To select the surface or curve, first click in the box, then select the surface or curve in the graphics window. Extrude Along Vector Enables extrusion along a specified vector. From Point (mm) The start point of the vector. To Point (mm) The end point of the vector. Extrude Along Curve Enables extrusion along a specified curve. Curve Denotes the curve used as a sweep path. xx0600003076 To select the curve, first click the box, then the curve in the graphics window. Make Solid Select this check box to convert the extruded form into a solid.GESPAC GESCI0-1B
公司主營優勢
應用行業
