GESPAC MPU-20H512工控控制卡件
GESPAC MPU-20H512從法線1創(chuàng)建直線。單擊“曲面選擇”。2.單擊“直線到法線”以打開一個對話框。3.單擊面以在“選擇面”框中選擇該面。4.在“長度”框中，指定直線的長度。5.（可選）選中“反轉法線”復選框以反轉線的方向。6.單擊“創(chuàng)建”。提示！在進行測量之前，請確保選擇適當的捕捉模式和選擇級別。測量距離或角度1。單擊要使用的測量類型：激活任何測量功能后，鼠標指針將變?yōu)闃顺摺?.在圖形窗口中，選擇要測量的點或對象。有關測量點的信息顯示在輸出窗口中。選擇所有點后，結果將顯示在輸出窗口的測量選項卡中。3.可選地，重復步驟3以進行相同類型的新測量。提示！您還可以從測量工具欄激活和停用測量功能。要測量在圖形窗口中選擇的兩點之間的“選擇距離”。由在圖形窗口中選擇的三個點定義的點到點角度。要選擇的第一個點是會聚點，然后在每條線上選擇一個點。角度直徑，GESPAC MPU-20H512圓由從圖形窗口中選擇的三個點定義。直徑在圖形窗口中選擇的兩個對象之間的最近距離。GESPAC MPU-20H512
GESPAC MPU-20H512工控控制卡件
Creating a line from normal 1. Click Surface Selection. 2. Click Line to Normal to bring up a dialog box. 3. Click on a face to select it in the Select Face box. 4. In the Length box, specify a length for the line. 5. Optionally, select the Invert Normal check box to invert the direction of the line. 6. Click Create. TIP! Make sure to select the appropriate snap mode and selection levels before making your measurements. Measuring distances or angles 1. Click the type of measurement you want to use: The mouse pointer will turn into a ruler when you have activated any of the measurement functions. 2. In the graphics window, select the points or objects to measure between. Information about the measuring points is displayed in the Output window. The results will be displayed in the Measurements tab in the Output window when all points have been selected. 3. Optionally, repeat step 3 for making a new measurement of the same type. TIP! You can also activate and deactivate the measurement functions from the measurement toolbar. To measure the Select distance between two points you select in the graphics window. Point to point angle defined by three points you select in the graphics window. The first point to select is the converging point, thereafter you shall select one point on each line. Angle diameter, with the circle defined by three points you select from the graphics window. Diameter closest distance between two objects you select in the graphics window.GESPAC MPU-20H512
公司主營優(yōu)勢
應用行業(yè)
