GESPAC 9728 MDC-1電路板
注意！在System Builder的Modify Options（修改選項）頁面上，向下滾動到Motion coordination part 3（運動協調部件3）組，并選中606-1輸送機跟蹤復選框。12.使用此新系統創建新站點。參見第192頁的機器人系統。注意！啟動系統后，當被要求為輸送機機構選擇庫時，瀏覽并選擇已保存的庫。編譯機制編譯時，在mechanism Modeler的創建模式下創建的新機制將添加到工作站，默認名稱為“mechanism_”，后跟一個索引號。編譯時，在Mechanical Modeler的修改模式下修改的現有可編輯機制將被保存，而無需任何姿勢、關節映射或過渡時間。要編譯機制，請執行以下步驟：1。要編譯新的或已編輯的機制，請單擊“編譯機制”。機構插入激活工位。將使用新名稱克隆鏈接零件，但相應的鏈接將更新其零件參考。關閉機制建模器后，這些克隆的零件將被刪除。2.機制建模器現在切換到修改模式。要完成該機制，請參見下文。
GESPAC MPU-20H512工控控制卡件
NOTE! On the Modify Options page of the System Builder, scroll down to the Motion coordination part 3 group and select 606-1 Conveyor Tracking check box. 12. Create new station using this new system. See Robot System on page 192. NOTE! After starting the system, when asked to select the library for the conveyor mechanism browse and select the already saved library. Compiling a mechanism When compiling, a new mechanism, created in the create mode of the Mechanism Modeler, is added to the station with the default name "Mechanism_" followed by an index number. When compiling, an existing editable mechanism, modified in the modify mode of the Mechanism Modeler, is saved without any poses, joint mapping ot transition times. To compile a mechanism, follow these steps: 1. To compile a new or edited mechanism, click Compile Mechanism. The mechanism is inserted into the active station. The link parts are cloned with new names, but the corresponding links will update their part references. When the Mechanism modeler is closed, these cloned parts will be removed. 2. The Mechanism Modeler now switches to modify mode. To complete the mechanism, see below.
公司主營優勢
應用行業
