NEC FC-9821KE工業計算機
NEC FC-9821KE運行模擬1。（可選）單擊啟用進程計時器。2.在“模擬控制”組中，單擊“播放”按鈕。輸出窗口現在將顯示來自虛擬控制器的消息。3.要暫停模擬，請單擊“暫?！卑粹o。4.要停止模擬，請單擊“停止”按鈕。5.要將模擬重置為初始狀態，請單擊重置按鈕。使用I/O模擬器1設置I/O信號。單擊I/O模擬器。這將打開I/O模擬器。2.如果工作站包含多個系統，請在“選擇系統”列表中選擇相應的系統。3.在過濾器列表和I/O范圍列表中，選擇顯示要設置的信號的選項。根據使用的過濾器，您還可以設置過濾器規范。4.要更改數字輸入/輸出信號的值，請單擊它。要更改模擬信號值，請在值框中鍵入新值NEC FC-9821KE。I/O模擬器窗口使用RobotStudio的I/O模擬器，您可以在程序執行期間查看和手動設置現有信號、組和交叉連接，從而可以模擬或操縱信號。I/O模擬器以16個信號的組一次顯示一個系統的信號。為了處理大量的信號，您可以過濾要顯示的信號，還可以創建帶有常用信號的自定義列表，以便快速訪問。NEC FC-9821KE
NEC FC-9821KE工業計算機
Running a simulation 1. Optionally, click Enable Process Timer. 2. In the Simulation Control group, click the Play button. The output window will now display messages from the virtual controller. 3. To pause the simulation, click the Pause button. 4. To stop the simulation, click the Stop button. 5. To reset the simulation to its initial state, click the Reset button. Setting I/O signals using the I/O Simulator 1. Click I/O Simulator. This opens the I/O simulator. 2. If the station contains several systems, select the appropriate one in the Select System list. 3. In the Filter list and I/O Range list, make selections that display the signals to set. Depending on the filter used, you might also set a filter specification. 4. To change the value of a digital I/O signal, click it. To change the value of an analog signal, type the new value in the value box. The I/O Simulator window With RobotStudio’s I/O simulator you view and manually set existing signals, groups and cross-connections during program execution, thus making it possible to simulate or manipulate the signals. The I/O simulator displays the signals for one system at a time in groups of 16 signals. For handling large sets of signals, you can filter which signals to display and also create custom lists with favorite signals for quick access.
公司主營優勢
應用行業
