NI PXIe-5653模擬信號發生器
1.產 品 介 紹
品牌：NI
型號：NI PXIe-5653
產品說明：模擬信號發生器
優勢：供應進口原裝正品，專業停產配件。
2.產 品 詳 情 資 料：
NI PXIe-5653使用相關中繼器/轉換器。復雜的多點配置包含一個或多個多點部分，其中隔離中繼器/轉換器作為其中一個分支。在簡單和復雜的多點配置中，NI PXIe-5653主設備下游的變送器可以一直打開。由于只有一個設備（主設備）向下游傳輸，因此通信線路不會發生爭用。在簡單的多點配置中，只要設備在空閑時三態驅動程序，并且只有在有東西要傳輸時才打開驅動程序，那么在上行傳輸時就不會發生爭用。Series 90-70和Series 90-30 CMM的情況就是如此。然而，在復雜的多點配置中，必須采取特殊步驟來切換隔離中繼器/轉換器的上游變送器。切換上游變送器。NI PXIe-5653為了使RS-422驅動程序在隔離中繼器/轉換器的J2端口激活，J處的RTS輸入必須為真。J端口上RS-422驅動器的狀態取決于裝置上開關的位置。當開關處于中間位置時
lated Repeater/Converter is used. Complex multidrop configurations contain one or more multidrop sections where an Isolated Repeater/Converter is included as one of the drops. In both simple and complex multidrop configurations, the transmitters directed downstream from the master can be on at all times. NI PXIe-5653There will be no contention for the communication line because only one device (the master) transmits downstream. In simple multidrop configurations, there will be no contention when transmitting upstream as long as devices tri-state their drivers when idle and turn them on only when they have something to transmit. This is the case for the Series 90-70 and Series 90-30 CMMs. In complex multidrop configurations, however, special steps must be taken to switch the upstream transmitters of the Isolated Repeater/Converter. Switching Upstream Transmitters. For the RS-422 drivers to be active at the J2 port of the Isolated Repeater/Converter, the RTS input at JNI PXIe-5653 must be true. The state of the RS-422 drivers at the JNI PXIe-5653 port depends on the position of the switch on the unit. When the switch is in the center position
3.產 品 展 示
4.公 司 優 勢
5.關 于 我 們
本篇文章出自瑞昌明盛自動化設備有限公司官網，轉載請附上此鏈接:http://m.wzljsf.com
