INDRAMAT KDS1.3-150-300-W1伺服模塊
1.產 品 介 紹
品牌：INDRAMAT
型號：INDRAMAT KDS1.3-150-300-W1
產品說明：伺服模塊
優勢：供應進口原裝正品，專業停產配件。
2.產 品 詳 情 資 料：
INDRAMAT KDS1.3-150-300-W1電源要求該裝置通過AAUI連接器從以太網接口抽取60 mA@5Vdc。LED指示燈這些指示燈位于RJ-45連接器旁邊的裝置末端。只要保持鏈路完整性，標記為L(zhǎng)I的那個就一直保持。標有“鋸齒狀箭頭”符號的收發器表示裝置存在5Vdc電源。注意：此收發器取代了過時的目錄號INDRAMAT KDS1.3-150-300-W1?符合IEEE 802.3 10BASE2以太網規范。?標準BNC連接器安裝在收發器主體上，用于連接到細同軸以太網電纜。?該裝置有一根連接的10“（254 mm）電纜，帶有標準14針AAUI連接器，用于連接到90-30系列以太網模塊INDRAMAT KDS1.3-150-300-W1或帶以太網接口的CPUINDRAMAT KDS1.3-150-300-W1。?SQE滑動開關在工廠設置為啟用位置。它必須處于該位置，才能與GE Fanuc以太網產品INDRAMAT KDS1.3-150-300-W1正常工作（見下圖）電源LED指示燈。
Power Requirement This unit draws 60 mA @ 5Vdc from the Ethernet interface via the AAUI connector. LED Indicator Lights These are located on the end of the unit next to the RJ-45 connector. The one labeled LI stays on as long as Link Integrity is maintained. The one marked with a “jagged arrow” symbol indicates the presence of 5Vdc power to the unit.Note: This transceiver replaces obsolete catalog number INDRAMAT KDS1.3-150-300-W1? Compliant with the IEEE 802.3 Ethernet specification for 10BASE2. ? A standard BNC connector is mounted on the body of the transceiver for connection to thin coaxial Ethernet cable. ? This unit has an attached 10” (254 mm) cable with standard 14-pin AAUI connector for connecting to a Series 90-30 Ethernet module INDRAMAT KDS1.3-150-300-W1 or CPU with Ethernet interfaceINDRAMAT KDS1.3-150-300-W1? SQE slide switch is set to enabled position at the factory. It must be in this position for proper operation with GE Fanuc Ethernet productsINDRAMAT KDS1.3-150-300-W1 (see figure below). ? Power LED indicator light.
3.產 品 展 示
4.公 司 優 勢
5.關 于 我 們
本篇文章出自瑞昌明盛自動化設備有限公司官網，轉載請附上此鏈接:http://m.wzljsf.com
