WINGREEN 03ZSTJ1-00-301-RS控制脈沖卡件
1.產 品 介 紹
品牌：WINGREEN
型號說明：WINGREEN 03ZSTJ1-00-301-RS控制脈沖卡件
優勢：供應進口原裝正品，專業停產配件。
公司主營特點：主營產品各種模塊/卡件，控制器，觸摸屏，伺服驅動器。
2.產 品 詳 情 資 料：
WINGREEN 03ZSTJ1-00-301-RS支持的控制器模塊162Bug支持以下VMEbus磁盤/磁帶控制器模塊。每種控制器類型的默認地址為First address，在命令BH、BO或IOP期間，或在TRAP#15調用.DSKRD或.DSKWR期間，F(xiàn)irst CLUN可以對控制器進行尋址。請注意，如果使用另一個相同類型的控制器，則第二個控制器的地址必須通過其板載跳線和/或開關進行更改，默認配置說明SCSI通用命令集（CCS）設備是摩托羅拉計算機集團測試的唯一設備。OT命令參數下表列出了與WINGREEN 03ZSTJ1-00-301-RS等板一起使用的軟盤的正確IOT命令參數。注釋1。除非另有說明，否則所有數值參數均為十六進制。2.DSDD5型軟盤是調試器的默認設置。WINGREEN 03ZSTJ1-00-301-RS
Controller Modules Supported The following VMEbus disk/tape controller modules are supported by the 162Bug. The default address for each controller WINGREEN 03ZSTJ1-00-301-RStype is First Address and the controller can be addressed by First CLUN during commands BH, BO, or IOP, or during TRAP #15 calls .DSKRD or .DSKWR. Note that if another controller of the same type is used, the second one must have its address changed by its onboard jumpers and/or switches, so that it matches Second Address and can be called up by Second CLUN.Default Configurations Note SCSI Common Command Set (CCS) devices are the only ones tested by Motorola Computer Group.IOT Command Parameters The following table lists the proper IOT command parameters for floppies used with boards such as the WINGREEN 03ZSTJ1-00-301-RSNotes 1. All numerical parameters are in hexadecimal unless otherwise noted. 2. The DSDD5 type floppy is the default setting for the debugger.
3.產 品 展 示
4.公 司 優 勢 主 營 產 品
5.相 關 產 品 展 示
本篇文章出自瑞昌明盛自動化設備有限公司官網，轉載請附上此鏈接:http://m.wzljsf.com
