PIONEER MAGNETICS PM3398B-6P-1-3P-E電源模塊

1.產      品      詳      情      資      料：   

當PIONEER MAGNETICS PM3398B-6P-1-3P-E模塊在冗余配置中運行時，黃色DUAL指示燈點亮。DUAL LED點亮的模塊是冗余配置中的主要[活動]模塊。注意：即使備份PIONEER MAGNETICS PM3398B-6P-1-3P-E模塊在冗余配置中出現錯誤或故障，冗余配置中主PIONEER MAGNETICS PM3398B-6P-1-3P-E的DUAL LED仍然亮起。DUAL LED熄滅黃色DUAL LED在滿足以下任何條件時熄滅：?PIONEER MAGNETICS PM3398B-6P-1-3P-E在單一配置中運行。?PIONEER MAGNETICS PM3398B-6P-1-3P-E在冗余配置中運行，但它充當備份模塊。所有LED熄滅可能原因1：與CEX總線上的PIONEER MAGNETICS PM3398B-6P-1-3P-E位置相比，硬件樹（在控制生成器中）中PIONEER MAGNETICS PM3398B-6P-1-3P-E的位置存在差異。糾正措施1：根據CEX總線上的位置檢查并糾正硬件樹中PIONEER MAGNETICS PM3398B-6P-1-3P-E模塊的位置，反之亦然。可能原因2：PIONEER MAGNETICS PM3398B-6P-1-3P-E模塊熱插拔，配置未下載到控制器。糾正措施2：確保在硬件樹（在控制生成器中）中為該位置配置模塊，并將配置下載到控制器?？赡茉?：PIONEER MAGNETICS PM3398B-6P-1-3P-E剛剛熱插入，正在配置過程中。糾正措施3：為模塊初始化留出時間。

The yellow DUAL LED is illuminated when the PIONEER MAGNETICS PM3398B-6P-1-3P-E module is run in redundant configuration. The module that has the DUAL LED illuminated is the primary [active] module in a redundant configuration. Note: Even if the backup PIONEER MAGNETICS PM3398B-6P-1-3P-E module runs with errors or fails in redundant configuration, the DUAL LED is still ON in primary CPIONEER MAGNETICS PM3398B-6P-1-3P-Emodule in redundant configuration. DUAL LED is OFF The yellow DUAL LED is OFF when any of the following conditions are met: ? CPIONEER MAGNETICS PM3398B-6P-1-3P-Eis run in single configuration. ? CPIONEER MAGNETICS PM3398B-6P-1-3P-Eis run in redundant configuration, but it acts as a backup module. All LED's are OFF Possible Cause 1: Difference in the CPIONEER MAGNETICS PM3398B-6P-1-3P-Eposition in the Hardware Tree (in the Control Builder) as compared to the CPIONEER MAGNETICS PM3398B-6P-1-3P-Eposition on the CEX-Bus. Corrective Action 1: Check and correct the position of CPIONEER MAGNETICS PM3398B-6P-1-3P-Emodule in the Hardware Tree in accordance with the position on CEX-Bus, or vice-versa. Possible Cause 2: The CPIONEER MAGNETICS PM3398B-6P-1-3P-Emodule is hot inserted and the configuration is not downloaded to the controller. Corrective Action 2: Ensure that the module is configured in the Hardware Tree (in the Control Builder) for that position, and that the configuration is downloaded to controller. Possible Cause 3: The CPIONEER MAGNETICS PM3398B-6P-1-3P-Eis just hot inserted and it is in the process of configuration. Corrective Action 3: Allow time for the module to initialize.

2.產      品      展      示      

3.公      司      優      勢     主      營      產      品

4.相      關      產     品      展      示

本篇文章出自瑞昌明盛自動化設備有限公司官網，轉載請附上此鏈接:http://m.wzljsf.com

品牌：PIONEER MAGNETIC

型號：PIONEER MAGNETICS PM3398B-6P-1-3P-E電源模塊

質保：一年

成色：全新/二手

優勢產品：ABB、GE、FOXBORO、TRICONEX、BENTLY、A-B、MOTOROLA、HONEYWELL 、SCHNEIDER 

                    WOODWARD、EMERSON、RELIANCE、DEIF、NI、XYVOM等

特點：主營產品各種模塊/卡件，控制器，觸摸屏，伺服驅動器。

應用行業：廣泛應用于冶金、石油天然氣、玻璃制造業、鋁業、石油化工、煤礦、造紙印刷、紡織印染、機械、電子制造、汽車制造、煙草、塑膠機械、電力、水利、水處理/環保、市政工程、鍋爐供暖、能源、輸配電等

快遞方式：國內順豐、德邦、京東快遞包郵，按照實際報價貨期發貨