GENERIC 26D023003數字量控制板卡
1.產 品 詳 情 資 料：
在單一配置中，PM864處理器單元的性能數據理論上峰值是PM860的兩倍。然而，有用的持續性能改進要低一點，并且在一定程度上取決于實際的應用程序，但與PM860相比，可以預期為10%至50%。在冗余配置中，執行性能略低于單一配置。在冗余配置中，從主CPU到備份CPU的切換時間小于10毫秒。關鍵功能?MPC862P微處理器以96 MHz運行。?32 MB RAM，帶內部或外部電池備份設施。?12 x S800 I/O單元可以連接到電氣模塊總線。?四個板載通信端口：–CN1+CN2，以太網端口（IEEE 802.3，10BaseT）–COM3，帶調制解調器支持的串行端口（RS-232C）–COM4，用于維修工具的串行端口冗余控制鏈路，用于冗余配置。?高完整性控制器（帶SM810和認證軟件）-過電壓保護-內部電壓監控-在非SIL和SIL1-2應用程序中運行應用程序代碼-支持S800 I/O高完整性
The PM864 processor unit, in single configuration, has performance data which theoretically peaks at twice the performance compared to the PM860. The useful sustained performance improvement is, however, a bit lower and somewhat dependent on the actual application program but can be expected to be 10 to 50% compared to PM860. In redundant configuration the execution performance is somewhat lower than in single configuration. Switch over time from Primary CPU to Backup CPU, in redundant configuration, is less than 10 ms.Key Features ? MPC862P Microprocessor running at 96 MHz. ? 32 MB RAM with internal or external battery back-up facility. ? 12 x S800 I/O units can be connected to the electrical ModuleBus. ? Four on-board communication ports: – CN1 + CN2, Ethernet ports (IEEE 802.3, 10BaseT) – COM3, serial port (RS-232C) with modem support – COM4, serial port (RS-232C) for service tool ? Basic communication is extendable by using additional communication interface units. ? Redundancy Control Link, for use in redundant configuration. ? High Integrity Controller (with SM810 and certified software) – Overvoltage protection – Internal voltage supervision – Runs application code in non-SIL and SIL1-2 applications – Supports S800 I/O High Integrity
2.產 品 展 示
3.公 司 優 勢 主 營 產 品
4.相 關 產 品 展 示
本篇文章出自瑞昌明盛自動化設備有限公司官網，轉載請附上此鏈接:http://m.wzljsf.com
