HIRSCHMANN MS20-1600SAAEHC07.1.01以太網交換機
1.產 品 詳 情 資 料：
基板是連接到CEX總線和外部電源的連接器所在的位置。它通過外殼的金屬部件接地至DIN導軌。該板還帶有外部電源表決二極管和保險絲。電源和邏輯板包含+3.3V轉換器、邏輯、用于CEX總線互連的驅動器和用于互連電纜的連接器。在具有兩個互連的BC810和主/備份CPU對的完全冗余系統中，BC810支持在線更換CPU底板，而不會干擾CEX流量。如果必須更換BC810，則連接到CEX段的所有通信都將停止。檢測到F（故障）/紅色電源錯誤。由硬件控制。在通電期間由硬件設置并清除。R（un）/綠色運行。由硬件控制。EPOK（外部電源正常）/綠色表示外部電源已連接并通電。C1/黃色表示直接連接的CEX段上的流量。C2/黃色表示互連的CEX段上的流量。
The baseplate is where the connectors to CEX-Bus and the external power reside. It is grounded to the DIN-rail through metal parts of the housing. The board also carries the external power voting diode and fuse. The power supply and logic board contains the +3.3 V converter, logic, drivers for CEX-Bus interconnection and the connector for interconnection cable. In a fully redundant system with two interlinked BC810 and primary/backup CPU pair, the BC810 support online replacement of the CPU baseplate without disturbing the CEX traffic. If the BC810 has to be replaced, all traffic to the connected CEX segment are stopped.F(ault) /Red Power supply error detected. Controlled by hardware. Set and cleared by the Hardware during power up. R(un) /Green Operating. Controlled by the Hardware. EPOK(external power OK) /Green Indicates that the external power is connected and powered up. C1 /Yellow Indicates traffic on the directly connected CEXsegment. C2 /Yellow Indicates traffic on the interconnected CEXsegment.
2.產 品 展 示
3.公 司 優 勢 主 營 產 品
4.相 關 產 品 展 示
本篇文章出自瑞昌明盛自動化設備有限公司官網，轉載請附上此鏈接:http://m.wzljsf.com
