HITACHI LPA302A輸入輸出模塊
1.產 品 詳 情 資 料：
電隔離是的，過電壓類別II額定絕緣電壓50 V絕緣測試電壓500 V a.c.1分鐘標稱電壓24 V電壓限值（UL=邏輯0，UH=邏輯1）-30 V<UL<5 V 15 V<UH<30 V標稱電流12 mA電流限值-22 mA<IL<2 mA 6 mA<IH<18 mA輸入阻抗1.8 kOhm高完整性控制器能夠使用SM811運行SIL3應用程序。執行熱插拔或?qū)⒏郊?替換SM811插入正在運行的系統會影響SIL3應用程序。應配置模塊以便進行同步。當運行SIL3應用程序時，用戶必須接受同步的開始，以配置插入的模塊。如果一個或多個SIL3應用程序正在控制器中運行，則它們被臨時中斷，以便使應用程序的狀態與新插入的SM811一致。用戶必須通過在已經運行的主安全模塊上的數字輸入3上創建邊緣來確認應用程序停止。
Electric isolation Yes Overvoltage category II Rated insulation voltage 50 V Insulation test voltage 500 V a.c. 1 min Nominal voltage 24 V Voltage limits (UL = logic 0, UH = logic 1) - 30 V < UL < 5 V 15 V < UH < 30 V Nominal current 12 mA Current limits - 22 mA < IL < 2 mA 6 mA < IH < 18 mA Input impedance 1.8 kOhm The High Integrity controller is able to run SIL3 applications using SM811. Performing a Hot swap or inserting an additional/replacement SM811 into a running system affects SIL3 applications. The Module should be configured in order to get synchronized. When running SIL3 applications, the start of the synchronization must be accepted by the user, to configure the inserted module. If one or more SIL3 applications are running in the controller, they are temporarily interrupted in order to get a consistent state of the application to the newly inserted SM811. The user must acknowledge the application stop by creating a edge on digital input 3 on the primary, already running, Safety Module.
2.產 品 展 示
3.公 司 優 勢 主 營 產 品
4.相 關 產 品 展 示
本篇文章出自瑞昌明盛自動化設備有限公司官網，轉載請附上此鏈接:http://m.wzljsf.com
