HITACHI LPA245A電源模塊
1.產 品 詳 情 資 料：
為了執行運行SIL3應用程序的HITACHI LPA245A的熱插拔，在熱插拔數字輸入（I3）打開之前，必須通過鍵開關打開訪問啟用數字輸入（I2）。這是通過將物理按鈕連接到數字輸入來執行的。系統等待確認30分鐘，如果未接收到確認，則插入的HITACHI LPA245A將關閉。為了恢復，需要啟動新的熱插拔，即HITACHI LPA245A必須被移除并再次插入。HITACHI LPA245A的同步包括：1。確保HITACHI LPA245A之間的同步鏈路已就位，也就是說，封閉的TK852V010電纜已分別正確連接到兩個SM鏈路連接器中。2.將HITACHI LPA245A插入其位置。3.當HITACHI LPA245A啟動時，同步LED閃爍，隨后它繼續閃爍，并按順序閃爍3次和暫停。4.按下按鈕（在已經運行的安全模塊上的數字輸入3上創建一個邊緣），一旦它開始以3次閃爍和一個暫停序列重復閃爍。5.同步指示燈閃爍得更快，直到同步完成。6.模塊同步時，同步指示燈變?yōu)辄S色。
For performing the hot swap of HITACHI LPA245A running a SIL3 application, the Access enable digital input (I2) must be turned ON through the key switch before the Hot-insert digital input (I3) is turned ON.This is performed by connecting a physical push-button to the digital input. The system waits for 30 minutes for the acknowledgement, if acknowledgement is not received the inserted HITACHI LPA245A will shut down. To recover, a new hot insert needs to be initiated i.e. the HITACHI LPA245A has to be removed and inserted again. Synchronization of the HITACHI LPA245A includes: 1. Make sure that the synchronization link between the HITACHI LPA245As is in place, that is, the enclosed TK852V010 cable is properly connected into both SM Link connectors respectively. 2. Insert the HITACHI LPA245A in its position. 3. When the HITACHI LPA245A starts the synchronization LED flashes, and later it continues to blink with 3 blinks and a pause in a sequence. 4. Push the button (create an edge on digital input 3 on the already running Safety Module), once it starts blinking repeatedly with 3 blinks and a pause sequence. 5. The Sync LED flashes faster until the synchronization is complete. 6. The Sync LED turns yellow when the module is synchronized.
2.產 品 展 示
3.公 司 優 勢 主 營 產 品
4.相 關 產 品 展 示
本篇文章出自瑞昌明盛自動化設備有限公司官網，轉載請附上此鏈接:http://m.wzljsf.com
