HITACHI LCE250B工控控制卡件
1.產 品 詳 情 資 料：
DP型主I類協議PROFIBUS DP通信速度9.6、19.2、93.75、187.5、500、1500、3000、6000或12000 kbit/s電流隔離是狀態指示燈正常運行為綠色，故障異常為紅色，兩個交通指示燈RTS和Rx/Tx為黃色閃爍，由交通速度控制。連接器DB9，母型電流消耗（來自CEX總線24 V DC）150 mA典型（最大200 mA）3.6 W典型功耗關鍵功能?一個基金會現場總線端口提供31.25 kbit/s（FF H1）的通信速度?變壓器隔離?FF H1總線不耗電?FF H1母線不供電?簡單DIN導軌安裝?預設，兩個字母的阿爾法密碼鎖，見第75頁表4，安裝在裝置底座中，以防止不兼容組件的錯誤安裝。說明CI852將基金會現場總線H1（FF H1）連接到AC 800M。FF H1的通信速度為31.25 kbit/s，用于現場儀器的遠程連接。CI852通過變壓器連接到總線，因此既不提供也不消耗總線電力?？赏ㄟ^CI852連接的現場儀器的數量取決于FF H1網絡的物理限制以及任何軟件限制（請參閱軟件文檔）。
Type DP Master Class I Protocol PROFIBUS DP Communication speed 9.6, 19.2, 93.75, 187.5, 500, 1500, 3000, 6000 or 12000 kbit/s Galvanic isolation Yes Status indicators Run normally green, Fault exceptionally red, the two traffic indicators RTS and Rx/Tx are yellow flashing controlled by the traffic pace. Connector DB9, female Current consumption (from CEX-Bus 24 V DC) 150 mA typical (200 mA max.) Power dissipation 3.6 W typical Key Features ? One FOUNDATION Fieldbus port provides a communication speed of 31.25 kbit/s (FF H1) ? Transformer isolated ? No power consumed from the FF H1 bus ? No power is supplied to the FF H1 bus ? Simple DIN-rail mounting ? Pre-set, two letter Alpha code lock, see Table 4 on page 75, installed in unit base to prevent incorrect mounting of non-compatible components. Description The CI852, connects the FOUNDATION Fieldbus H1 (FF H1) to the AC 800M. The FF H1 has a communication speed of 31.25 kbit/s and is intended for remote connection of field instruments. The CI852 is connected to the bus via a transformer, and as such neither supplies nor consumes bus electrical power. The number of field instruments that can be connected via the CI852 depends on the physical limitations of the FF H1 network, together with any software limitations (refer to the software documentation).
2.產 品 展 示
3.公 司 優 勢 主 營 產 品
4.相 關 產 品 展 示
本篇文章出自瑞昌明盛自動化設備有限公司官網，轉載請附上此鏈接:http://m.wzljsf.com
