REXROTH CDB01.1C-ET-EN1-EN1-NNN-MEM-L2-S-NN-FW運動控制設備
1.產 品 資 料 介 紹：
中文資料：
CDB01.1C -ET-EN1-EN1-NNN-MEM-L2-S-NN-FW型號是Rexroth Indramat開發的現代運動控制設備之一。該型號是 CBD 系列驅動控制單元的控制部分。該模型采用了最新的安全技術。CBD01.1控制部分廣泛應用于包裝機械、食品加工機械、紡織機械等工業自動化領域。該模塊作為單獨的組件在全球范圍內發貨，固件必須單獨訂購。控制部分附帶一年產品更換保修，可在出現任何故障時提出索賠。驅動控制器提供廣泛的固件功能，包括符合 IEC 標準的運動邏輯。確保由經過培訓的人員安裝和配置控制單元。為了保護CDB01.1 控制部分免受保留極性和錯誤連接的影響，請使用保護二極管。由于其可靠性和經濟性，控制單元在力士樂驅動系統中發揮著重要作用。
CDB01.1C-ET-EN1-EN1-NNN-MEM-L2-S-NN-FW型號應防止灰塵和污垢。將設備安裝在控制柜中，以將環境溫度保持在 0 至 +40 攝氏度的范圍內。相對濕度不得超過規定的限值。該模塊設計為通過環境空氣進行冷卻。該產品（CDB01.1C-ET-EN1-EN1-NNN-MEM-L2-S-NN-FW）的物理尺寸為 49.5mm x 103mm x 241mm。該模型允許 PWM 頻率從 2 kHz 切換到 16 kHz，增量為 2 kHz?？刂撇糠志哂邪踩ぞ仃P(guān)閉功能，可防止意外或突然停止引起的攪動
英文資料：
The CDB01.1C - ET-EN1-EN1-NNNN-MEM-L2-S-NN-FW model is one of the modern motion control devices developed by Rexroth Indramat. This model is the control part of the CBD series drive control unit. This model adopts the latest security technologies. The control part of CBD01.1 is widely used in industrial automation fields such as packaging machinery, food processing machinery, textile machinery, etc. This module is shipped as a separate component worldwide, and firmware must be ordered separately. The control part comes with a one-year product replacement warranty, which allows for claims in the event of any malfunction. The drive controller provides a wide range of firmware functions, including motion logic that complies with IEC standards. Ensure that the control unit is installed and configured by trained personnel. To protect the control section of CDB01.1 from the effects of retained polarity and incorrect connections, please use protective diodes. Due to its reliability and economy, the control unit plays an important role in the Rexroth drive system.
The CDB01.1C-ET-EN1-EN1-NNNN-MEM-L2-S-NN-FW model should be protected from dust and dirt. Install the equipment in the control cabinet to maintain the ambient temperature within the range of 0 to+40 degrees Celsius. The relative humidity shall not exceed the specified limit. This module is designed for cooling through ambient air. The physical dimensions of this product (CDB01.1C-ET-EN1-EN1-NNNN-MEM-L2-S-NN-FW) are 49.5mm x 103mm x 241mm. This model allows the PWM frequency to switch from 2 kHz to 16 kHz in increments of 2 kHz. The control part has a safety torque shut-off function to prevent agitation caused by accidents or sudden stops
2.產 品 展 示
3.主 營 品 牌
本篇文章出自瑞昌明盛自動化設備有限公司官網，轉載請附上此鏈接:http://m.wzljsf.com
