AMAT Applied Materials DP-200-5F控制器模塊 PDF資料
1.產 品 資 料 介 紹：
已知規格與特性
模型：DP-200-5F
制造商：Applied Materials (AMAT)
輸入電源：三相交流 200 V，50/60 Hz
輸出能力：200 V 直流，最大電流 5 A
控制模式支持：恒壓 (CV)、恒流 (CC)、恒功率 (CP)
控制方式：可本地控制或遠程控制
這些參數經多個銷售 / 零件目錄資料確認，是該模塊的主要電氣規格。
可能 / 常見設計特性與功能（基于模塊用途推斷）
多模式控制
能根據負載需求在恒壓、恒流與恒功率三種控制模式中切換，以適應不同場合（如驅動電源、線圈、加熱器等）。本地與遠程切換
模塊具備本地操作界面或開關，以及遠程信號接口，便于集成在設備控制系統中，由上層控制器下發命令。保護機制
為保障設備與模塊安全，通常具備：過流保護
過壓 / 欠壓保護
短路故障保護
過溫保護
故障報警 / 狀態反饋
穩定性與品質
在直流輸出時，應具備良好的電壓 / 電流穩定性、低紋波、抗干擾能力，以滿足半導體設備或精密設備對電源質量的高要求。散熱 / 結構設計
內部可能包含散熱片、風道或強制風冷結構，以排除功率損失產生的熱量。模塊通常設計為可插拔 / 插槽式以便于維護與替換。可靠性與環境適應性
在潔凈室或半導體制造環境中使用，對溫度、震動、電磁兼容性 (EMC) 要求較高。設計中可能考慮防塵、抗電磁干擾、耐用壽命等。系統兼容接口
在設備系統內需與控制總線、信號層、接地 / 地線系統、電氣接口兼容，確保控制、反饋、保護等功能協同運作。
AMAT Applied Materials DP-200-5F控制器模塊 英文介紹
Known specifications and characteristics
Model: DP-200-5F
Manufacturer: Applied Materials (AMAT)
Input power supply: three-phase AC 200 V, 50/60 Hz
Output capacity: 200 V DC, maximum current 5 A
Control mode support: Constant Voltage (CV), Constant Current (CC), Constant Power (CP)
Control mode: can be controlled locally or remotely
These parameters have been confirmed by multiple sales/parts catalogs and are the main electrical specifications for this module.
Possible/common design features and functions (inferred based on module usage)
Multi mode control
Can switch between constant voltage, constant current, and constant power control modes according to load requirements to adapt to different situations (such as driving power supply, coil, heater, etc.).
Local and remote switching
The module has a local operating interface or switch, as well as a remote signal interface, making it easy to integrate into the device control system and issue commands from the upper level controller.
protection mechanism
To ensure the safety of equipment and modules, it is usually necessary to have:
overcurrent protection
Overvoltage/undervoltage protection
Short circuit fault protection
over-temperature protection
Fault alarm/status feedback
Stability and Quality
When outputting DC, it should have good voltage/current stability, low ripple, and anti-interference ability to meet the high requirements of semiconductor or precision equipment for power quality.
Heat dissipation/structural design
Internally, there may be heat sinks, air ducts, or forced air cooling structures to eliminate the heat generated by power loss. Modules are typically designed as pluggable/slot based for easy maintenance and replacement.
Reliability and environmental adaptability
When used in clean rooms or semiconductor manufacturing environments, high requirements are placed on temperature, vibration, and electromagnetic compatibility (EMC). Dust prevention, electromagnetic interference resistance, and durability may be considered in the design.
System compatible interface
In the equipment system, it is necessary to be compatible with the control bus, signal layer, grounding/grounding system, and electrical interface to ensure the coordinated operation of control, feedback, protection, and other functions.
AMAT Applied Materials DP-200-5F控制器模塊 產品展示
3.其他產品
IS200WETAH1AEC 接口模塊
FOXBORO H90 H90C9AA0117S計算機工作站
EMERSON P188.R2連接器板
4.其他英文產品
ACMETRANSFORMER T-2-53007-S transformer
IC695CPE310-ABAD gas turbine electric card
MVME7100 Digital card
| T22NRHK-LNN-NS-00 | CACR-SR15SZ1SSY232 | 60-0310-01,60 |
| T22NRHJ-LNN-NS-00 | CACR-SR60BE13SY112 | 68-0061-10 |
| T22NRHJ-LDN-NS-00 | GESPAC GESDAC-2B 8945 | 061-04790-0012 |
| T21NRLH-LNN-NS-00 | 6SC6120-0FE01 | 125760-01 |
| T21NRLD-LNN-NS-00 | 6SC6170-0FC01 | 6ES5451-4UA12 |
| T21NRLC-LNN-NS-00 | GESPAC GESDMC-2 | 6ES5135-3UA11 |
本篇文章出自瑞昌明盛自動化設備有限公司官網，轉載請附上此鏈接:http://www.jiangxidcs
